All Variables

From Macros Wiki
Revision as of 18:43, 20 August 2010 by ConnerO (talk | contribs)
Jump to: navigation, search
These variables are set by some of the macro commands Set by Version Number
Button Number of button pressed on macro dialog. ( OK button = zero ) 9, 4, 25
CircleRef Number of circle created by a circle geometry command 9, 4, 25
ContourRef Number of contour created by a contour geometry command 9, 4, 25
CsNumber Number of CS created by the NEW_CS command 9, 4, 25
CURRENT_CS_NUM Number set automatically by the system when a coordinate system is selected or created 9, 0, 0
CURRENT_WG_NUM Number set automatically by the system when a workgroup is selected or created 9, 0, 0
ExcelCellLength Number set automatically by the system when using the EXCEL_FIND_CELL command 9, 4, 25
ExcelError Error code set by all Excel commands 9, 4, 25
EXCEL_IS_OPEN Number set automatically by the system dictating whether or not an excel file is open 9, 0, 0
EXCEL_IS_VISIBLE Number set automatically by the system dictating whether or not an excel file is visible 9, 0, 0
FEAT_TYPE_ARC Number set automatically by the system about a feature type 9, 0, 0
FEAT_TYPE_CTOOL Number set automatically by the system about a feature type 9, 0, 0
FEAT_TYPE_CURVE Number set automatically by the system about a feature type 9, 0, 0
FEAT_TYPE_LINE_IJK Number set automatically by the system about a feature type 9, 0, 0
FEAT_TYPE_LINE Number set automatically by the system about a feature type 9, 0, 0
FEAT_TYPE_MARKER Number set automatically by the system about a feature type 9, 0, 0
FEAT_TYPE_POINT Number set automatically by the system about a feature type 9, 0, 0
FEAT_TYPE_RAPID Number set automatically by the system about a feature type 9, 0, 0
FEAT_TYPE_SPLINE Number set automatically by the system about a feature type 9, 0, 0
FileError Error code set by all file commands 9, 4, 25
GIBBSCAM_VERSION_1 Number set automatically by the system dictating the version of gibbscam is running 9, 4, 24
GIBBSCAM_VERSION_2 Number set automatically by the system dictating the version of gibbscam is running 9, 4, 24
GIBBSCAM_VERSION_3 Number set automatically by the system dictating the version of gibbscam is running 9, 4, 24
GIBBSCAM_WINDOW_X1 Number set automatically by the system dictating the first x position of the gibbscam window 9, 0, 0
GIBBSCAM_WINDOW_X2 Number set automatically by the system dictating the second x position of the gibbscam window 9, 0, 0
GIBBSCAM_WINDOW_Y1 Number set automatically by the system dictating the first y position of the gibbscam window 9, 0, 0
GIBBSCAM_WINDOW_Y2 Number set automatically by the system dictating the second y position of the gibbscam window 9, 0, 0
HoleFrAngle Number set automatically when using the HOLEFR_GET_FEAT command 9, 4, 25
HoleFrBottom Number set automatically when using the HOLEFR_GET_FEAT command 9, 4, 25
HoleFrBottomClear Number set automatically when using the HOLEFR_GET_FEAT command 9, 4, 25
HoleFrBottomZ Number set automatically when using the HOLEFR_GET_FEAT command 9, 4, 25
HoleFrCS Number set automatically when using the HOLEFR_GET_FEAT command 9, 4, 25
HoleFrDepth Number set automatically when using the HOLEFR_GET_FEAT command 9, 4, 25
HoleFrDia Number set automatically when using the HOLEFR_GET_FEAT command 9, 4, 25
HoleFrDiaTop Number set automatically when using the HOLEFR_GET_FEAT command 9, 4, 25
HoleFrError Error code set by all HOLEFR commands 9, 4, 25
HoleFrFullDepth Number set automatically when using the HOLEFR_GET_FEAT command 9, 4, 25
HoleFrMidDepth Number set automatically when using the HOLEFR_GET_FEAT command 9, 4, 25
HoleFrPosAxisX Number set automatically when using the HOLEFR_GET_FEAT command 9, 4, 25
HoleFrPosAxisY Number set automatically when using the HOLEFR_GET_FEAT command 9, 4, 25
HoleFrPosAxisZ Number set automatically when using the HOLEFR_GET_FEAT command 9, 4, 25
HoleFrPosTopX Number set automatically when using the HOLEFR_GET_FEAT command 9, 4, 25
HoleFrPosTopY Number set automatically when using the HOLEFR_GET_FEAT command 9, 4, 25
HoleFrPosTopZ Number set automatically when using the HOLEFR_GET_FEAT command 9, 4, 25
HoleFrPosX Number set automatically when using the HOLEFR_GET_FEAT command 9, 4, 25
HoleFrPosY Number set automatically when using the HOLEFR_GET_FEAT command 9, 4, 25
HoleFrPosZ Number set automatically when using the HOLEFR_GET_FEAT command 9, 4, 25
HoleFrRef Number set automatically when using the HOLEFR_GET_FEAT command 9, 4, 25
HoleFrRevCS Number set automatically when using the HOLEFR_GET_FEAT command 9, 4, 25
HoleFrThroughType Number set automatically when using the HOLEFR_GET_FEAT command 9, 4, 25
HoleFrtipAngle Number set automatically when using the HOLEFR_GET_FEAT command 9, 4, 25
HoleFrTop Number set automatically when using the HOLEFR_GET_FEAT command 9, 4, 25
HoleFrTopClear Number set automatically when using the HOLEFR_GET_FEAT command 9, 4, 25
HoleFrTopZ Number set automatically when using the HOLEFR_GET_FEAT command 9, 4, 25
HoleFrType Number set automatically when using the HOLEFR_GET_FEAT command 9, 4, 25
HoleFrWidth Number set automatically when using the HOLEFR_GET_FEAT command 9, 4, 25
LineRef Number of line created by a line geometry command 9, 4, 25
MTOOL_HOLDER   9, 0, 0
MTOOL_HOLDER_TYPE   9, 4, 24
MTOOL_HOLDER_TYPE_BORE   9, 4, 24
MTOOL_HOLDER_TYPE_COLLET   9, 4, 24
MTOOL_HOLDER_TYPE_DRILL   9, 4, 24
MTOOL_HOLDER_TYPE_MILL   9, 4, 24
MTOOL_HOLDER_TYPE_ROT_CLAMP   9, 4, 24
MTOOL_HOLDER_TYPE_SHELL   9, 4, 24
MTOOL_HOLDER_TYPE_SHRINK_FIT   9, 4, 24
MTOOL_HOLDER_TYPE_TAP   9, 4, 24
MTOOL_HOLDER_TYPE_TG_COLLET   9, 4, 24
PLUGIN_VERSION_1   9, 4, 24
PLUGIN_VERSION_2   9, 4, 24
PLUGIN_VERSION_3   9, 4, 24
PointRef Number of point created by a point geometry command 9, 4, 25
ReadVarsNumVars Number of variables read using READ_NUM_VARS command 9, 4, 25
SCREEN_HEIGHT   9, 0, 0
SCREEN_WIDTH   9, 0, 0
SolidRef Number of solid created by an EXTRUDE_SHAPE command 9, 4, 25
TOOL_ORIENT_DL   9, 4, 24
TOOL_ORIENT_DOWN_LEFT   9, 4, 24
TOOL_ORIENT_DOWN_RIGHT   9, 4, 24
TOOL_ORIENT_DOWN_RIGHT   9, 4, 24
TOOL_ORIENT_DR   9, 4, 24
TOOL_ORIENT_LD   9, 4, 24
TOOL_ORIENT_LEFT_DOWN   9, 4, 24
TOOL_ORIENT_LEFT_UP   9, 4, 24
TOOL_ORIENT_LU   9, 4, 24
TOOL_ORIENT_RD   9, 4, 24
TOOL_ORIENT_RIGHT_DOWN   9, 4, 24
TOOL_ORIENT_RIGHT_UP   9, 4, 24
TOOL_ORIENT_RU   9, 4, 24
TOOL_ORIENT_UL   9, 4, 24
TOOL_ORIENT_UP_LEFT   9, 4, 24
TOOL_ORIENT_UP_RIGHT   9, 4, 24
TOOL_ORIENT_UR   9, 4, 24
TOOL_TYPE_35_DEG   9, 4, 24
TOOL_TYPE_55_DEG   9, 4, 24
TOOL_TYPE_55_PARA   9, 4, 24
TOOL_TYPE_80_DEG   9, 4, 24
TOOL_TYPE_BACK_BORE   9, 0, 0
TOOL_TYPE_BALL_END_MILL   9, 0, 0
TOOL_TYPE_BORE   9, 0, 0
TOOL_TYPE_CENTER_DRILL   9, 0, 0
TOOL_TYPE_COUNTERSINK   9, 0, 0
TOOL_TYPE_CUTOFF   9, 4, 24
TOOL_TYPE_DRILL   9, 0, 0
TOOL_TYPE_FACE_CUTTER   9, 0, 0
TOOL_TYPE_FINISH_END_MILL   9, 0, 0
TOOL_TYPE_FLY_CUTTER   9, 0, 0
TOOL_TYPE_FORM   9, 4, 24
TOOL_TYPE_GROOVE   9, 4, 24
TOOL_TYPE_KEY_CUTTER   9, 0, 0
TOOL_TYPE_PENTAGON   9, 4, 24
TOOL_TYPE_REAMER   9, 0, 0
TOOL_TYPE_RECTANGLE   9, 4, 24
TOOL_TYPE_RIGID_TAP   9, 0, 0
TOOL_TYPE_ROUGH_END_MILL   9, 0, 0
TOOL_TYPE_ROUND   9, 4, 24
TOOL_TYPE_ROUNDOVER   9, 0, 0
TOOL_TYPE_SHELL_CUTTER   9, 0, 0
TOOL_TYPE_SPOT_DRILL   9, 0, 0
TOOL_TYPE_SPOT_FACE   9, 0, 0
TOOL_TYPE_SQUARE   9, 4, 24
TOOL_TYPE_TAP   9, 0, 0
TOOL_TYPE_THREAD_MILL   9, 0, 0
TOOL_TYPE_THREAD1   9, 4, 24
TOOL_TYPE_THREAD2   9, 4, 24
TOOL_TYPE_TRIANGLE   9, 4, 24
TOOL_TYPE_TRIGON   9, 4, 24
TOOL_TYPE_UTIL   9, 4, 24
TOOL_TYPE_VPROFILE   9, 0, 0
WgNumber Number of WorkGroup created by the NEW_WG command 9, 4, 25