MODIFY CS

From Macros Wiki
Jump to: navigation, search

Up

Command

MODIFY_CS <cs number> <ORIGIN or ALIGN_H or ALIGN_V> [point or line data]


Modify an existing CS by moving the origin or aligning the H or V axis with a line (or 2 points).

Parameters

<cs number>
CS number
<modify type>
ORIGIN=move origin or CS, ALIGN_H=align H axis or CS, ALIGN_H=align V axis or CS
<point or line data>
point or line data, depending on modify type

For ORIGIN, specify either the geometry reference number of a point, or 3 values for the XYZ position of the point.
For ALIGN_H or ALIGN_V, specify either the geometry reference number of a line, or 6 values for 2 sets of XYZ position for 2 points on a line.

Example

MODIFY_CS 3, ORIGIN, 40  ! move the origin to point 40
MODIFY_CS 3, ORIGIN, 1.5, 12.6, -18.125


MODIFY_CS 3, ALIGN_H, 61  ! align the H axis with line 61
MODIFY_CS 3, ALIGN_V, 1.5, 1.0, 0.0, 23.5, 1.0, 0.0