Operation Floating Point

From Macros Wiki
Jump to: navigation, search
Parameter Description Version Number
ENTRY_CLEAR Entry clearance value
EXIT_CLEAR Exit clearance value
ENTRY_FEED Entry feedrate
CONTOUR_FEED Contour feedrate
CUT_WIDTH Cut width
DRILL_CLEAR_PLANE Drill clearance plane height
STOCK Stock amount
BOSS_STOCK Boss stock amount
RPM Spindle speed
TIME Time
LENGTH Length
CSS Constant surface speed value
SURFACE_STOCK Surface stock amount
SURF_STOCK Surface stock
LATHE_STOCK_X Lathe stock in X
LATHE_STOCK_Z Lathe stock in Z
LATHE_CUT_WIDTH Cut width
CUT_TOL Cut tolerance
STEP Step value
DEPTH Depth
OD_ID_FACE OD ID Face setting
LATHE_DEPTH Depth of cut
DRILL_DWELL Drill cycle dwell amount
DRILL_TAP_PERCENT Tap percentage
DRILL_PECK_CLEARANCE Drill peck clearance
DRILL_PECK_AMOUNT Drill peck depth
DRILL_PECK_RETRACT Drill peck retract amount
DRILL_BORE_PULLOFF Bore pulloff amount
DRILL_CB_START_RIZ Drill cycle start RIZ
DRILL_CB_END_RIZ Drill cycle end RIZ
SURFACE_DEPTH Surface depth
MATERIAL_ONLY_CLEARANCE Material only clearance
LTHREAD_ANGLE Lathe thread angle
LTHREAD_NOMINAL_XD Nominal diameter
LTHREAD_TPI Lathe thread number of TPI
LTHREAD_PITCH Lathe thread pitch
LTHREAD_SLOPE Lathe thread slope value
LTHREAD_MINOR_XD Lathe thread minor diameter
LTHREAD_HEIGHT_XR Lathe thread height as a radial value
LTHREAD_RUN_IN_X Run in amount in X
LTHREAD_RUN_IN_Z Run in amount in Z
LTHREAD_RUN_OUT_X Run out amount in X
LTHREAD_RUN_OUT_Z Run out amount in Z
LTHREAD_FIRST_CUT Lathe thread first cut option
LTHREAD_LAST_CUT Lathe thread last cut option
LPLUNGE_MAX_CUT Lathe plunge maximum cut
LPLUNGE_ANGLE Lathe plunge angle
LPLUNGE_PECK_AMOUNT Lathe plunge peck amount
LPLUNGE_PECK_CLEARANCE Lathe plunge peck clearance
LPLUNGE_PECK_RETRACT Lathe plunge peck retract amount
LPLUNGE_FEED_PERCENT Lathe plunge feed percentage
LPLUNGE_ENTRY_TYPE Lathe plunge entry type
LATHE_PATTERN_SHIFT_CUT_X Pattern shift cut amount in X
LATHE_PATTERN_SHIFT_CUT_Z Pattern shift cut amount in Z
LATHE_PATTERN_SHIFT_PT_X Pattern shift point in X
LATHE_PATTERN_SHIFT_PT_Z Pattern shift point in Z
WRAP_START_ANGLE Wrap start angle
WRAP_DUP_ANGLE Wrap duplication angle
LATHE_MAX_RPM Maximum RPM
POCKET_ENTRY_PLUNGE_PT_X Pocket entry point in X
POCKET_ENTRY_PLUNGE_PT_Y Pocket entry point in Y
POCKET_ENTRY_RAMP_SLOPE Pocket entry ramp slope
POCKET_ENTRY_RAMP_START_Z Pocket entry ramp start Z position
POCKET_ENTRY_RAMP_MAX_CUT Pocket entry ramp maximum cut
POCKET_ENTRY_RAMP_WALL_CLEAR Pocket entry ramp wall clearance
POCKET_ENTRY_RAMP_ANGLE Pocket entry ramp angle
POCKET_ENTRY_HELIX_SLOPE Pocket entry slope
POCKET_ENTRY_HELIX_ANGLE Pocket entry helix angle
POCKET_ENTRY_HELIX_START_Z Pocket entry start Z
POCKET_ENTRY_HELIX_MAX_CUT Pocket entry maximum cut
POCKET_ENTRY_HELIX_WALL_CLEAR Pocket entry wall clearance
POCKET_ENTRY_HELIX_DIA Pocket entry helix diameter
POCKET_ENTRY_HELIX_CP_X Pocket entry helix X center
POCKET_ENTRY_HELIX_CP_Y Pocket entry helix Y center
POCKET_ENTRY_PERIPH_START_Z Pocket entry periphery start Z position
POCKET_ENTRY_PERIPH_SLOPE Pocket entry periphery slope
SURFACE_ENTRY_PLUNGE_PT_X Surface entry plunge point in X
SURFACE_ENTRY_PLUNGE_PT_Y Surface entry plunge point in Y
RAPID_CLEARANCE Rapid clearance
ENTRY_LINE_LEN Entry line length
EXIT_LINE_LEN Exit line length
ENTRY_RAD Entry arc radius
EXIT_RAD Exit arc radius
Z_STEP_WANTED Z stepover desired
OVERHANG Overhang amount
OVERLAP Overlap amount
OPEN_CLEARANCE Open clearance value
MTHREAD_START_THREAD Thread mill start thread
MTHREAD_END_THREAD Thread mill end thread value
MTHREAD_CUT_DIA Thread mill cut diameter
MTHREAD_CLEAR_DIA Thread mill clear diameter
MTHREAD_PITCH Thread mill pitch
MTHREAD_FEED Thread mill feedrate
SURFACE_STEP_OVER Surface stepover
SURFACE_RIDGE_HEIGHT Surface ridge height
SURFACE_CUT_ANGLE Surface cut angle
SURFACE_DESIRED_Z Surface desired Z depth
SURFACE_CONSTRAINT_FACES_CLEAR Surface constraint faces clear option
SURFACE_STOCK_TOL Surface stock tolerance
SURFACE_FIXTURE_TOL Surface fixture tolerance
SURFACE_CONSTRAINT_TOL Surface constraint tolerance
SURFACE_SMOOTH_TOL Surface smoothing tolerance
SURFACE_ARC_FIT_TOL Surface arc fit tolerance
SURFACE_SPLINE_TOL Surface spline tolerance
SURFACE_NORMAL_ANGLE Surface normal angle
SURFACE_STEP_CUT_RATIO Surface stepover cut ration
SURFACE_CORNER_RAD Surface corner radius
SURFACE_MAX_CUT_ANGLE Surface maximum cut angle
CP1 CP1 value
CURVE_TOLERANCE Curver tolerance
AUTO_ENTRY_CP Entry clear plane height
AUTO_ENTRY_CLEAR_RAD Entry move clear radius
AUTO_EXIT_CP Exit clear plane height
AUTO_EXIT_CLEAR_RAD Exit move clear radius
GEO_RAD Geometry radius
MIN_RAD Minimum radius
Z_STEP Actual Z stepover
FM_CLEAR Clearance option
FM_CUT_WIDTH Cut width
CUT_ANGLE Cut angle
STEPOVER_FEED Stepover feed value
CLEAR_FEED Clearance feedrate
SCALLOP_FEED Scallop feed amount
MIN_CUT Minimum cut
PAST_STOCK Past stock amount
LTHREAD_Z_START Lathe thread Z start position
LTHREAD_Z_END Lathe thread Z end position
LTHREAD_MAJOR_DIA Lathe thread major diameter
LATHE_SURFACE_Z Surface z value
LROUGH_MIN_RAD Lathe rough minimum radius
LROUGH_ENTRY_LINE Lathe rough entry line option
LROUGH_ENTRY_RAD Lathe rough entry arc radius
LROUGH_EXIT_RAD Lathe rough exit arc radius
LROUGH_EXIT_LINE Lathe rough exit line option
LROUGH_START Lathe rough start option
LROUGH_CUT_WIDTH Lathe rough cut width
LROUGH_RAMP_ANGLE Lathe rough ramp angle
WALL_TOP Wall top
WALL_ANG Wall angle
WALL_BOT Wall bottom value
WALL_ITOP Internal wall top
WALL_IANG Internal wall angle
WALL_IBOT Internal wall bottom
WALL_USER_STEP Wall user step amount
WALL_SHAPE_STEP Wall uses shape step
WALL_RIDGE_HEIGHT Wall ridge height
DRILL_CLEAR_PLANE_LOC_CS Use local CS
MSURF_CLEAR Surface clearance
MSURF_STOCK_TOL Surface stock tolerance
MFIXTURE_TOL Mill fixture tolerance
M_ZSHIFT Z shift value
CONTOUR_EXTRA_OFFSETS_VAL Extra offsets values 10.5.18
CONTOUR_ENTRY_RAMP_SLOPE Contour entry ramp slope
CONTOUR_ENTRY_RAMP_START_Z Contour entry ramp start Z
CONTOUR_ENTRY_RAMP_MAX_CUT Contour entry ramp maximum cut
CONTOUR_ENTRY_RAMP_ANGLE Contour entry ramp angle
CONTOUR_ENTRY_HELIX_SLOPE Contour entry helix slope
CONTOUR_ENTRY_HELIX_START_Z Contour entry helix start Z
CONTOUR_ENTRY_HELIX_MAX_CUT Contour entry helix maximum cut
CONTOUR_ENTRY_HELIX_DIA Contour entry helix diameter
DRILL_BORE_CUT_DIA Drill bore cut diameter
DRILL_BORE_CLEAR_DIA Drill bore clear diameter
DRILL_BORE_CLEAR_AMOUNT Drill bore clear amount
DRILL_BORE_ENTRY_EXIT_RAD Drill bore entry and exit radius
DRILL_BORE_ENTRY_EXIT_LINE Drill bore entry and exit line length
DRILL_BORE_CUT_WIDTH Drill bore cut width
DRILL_BORE_STOCK Drill bore stock amount
DRILL_BORE_OVERLAP Drill bore overlap amount
DRILL_BORE_APPROACH_ANGLE Drill bore approach angle
DRILL_BORE_DESIRED_STEP Drill bore desired step
ADV_LINE_ENTRY_OFF_PART_LINE Line Entry Off Part Line value 10.2.22
ADV_LINE_ENTRY_OFF_PART_ANGLE Line Entry Off Part Line angle 10.2.22
ADV_LINE_ENTRY_OFF_PART_DIST Line Entry Off Part distance 10.2.22
ADV_LINE_ENTRY_RAMP_DIST Line Entry Ramp distance 10.2.22
ADV_LINE_EXIT_OFF_PART_LINE Line Exit Off Part Line value 10.2.22
ADV_LINE_EXIT_OFF_PART_ANGLE Line Exit Off Part Line angle 10.2.22
ADV_LINE_EXIT_OFF_PART_DIST Line Exit Off Part distance 10.2.22
ADV_LINE_EXIT_RAMP_DIST Line Exit Ramp distance 10.2.22
ADV_ARC_ENTRY_OFF_PART_LINE Arc Entry Off Part Line value 10.2.22
ADV_ARC_ENTRY_OFF_PART_DIST Arc Entry Off Part distance 10.2.22
ADV_ARC_ENTRY_RAMP_DIST Arc Entry Ramp distance 10.2.22
ADV_ARC_EXIT_OFF_PART_LINE Arc Exit Off Part Line value 10.2.22
ADV_ARC_EXIT_OFF_PART_DIST Arc Exit Off Part distance 10.2.22
ADV_ARC_EXIT_RAMP_DIST Arc Exit Ramp distance 10.2.22
LROUGH_END_LIMIT_VAL lathe Roughing End Limit Value 10.2.22
BAXIS_MIN_ANGLE_VAL B Axis Turning, Minimum Angle 10.2.22
BAXIS_MAX_ANGLE_VAL B Axis Turning, Maximum Angle 10.2.22
BAXIS_LEAD_LAG_ANGLE B Axis Turning, Lead Lag Angle 10.2.22
BAXIS_COLLISION_CLEARANCE B Axis Turning, Collision Check Clearance 10.2.22
THREAD_WHIRL_NUM_FLUTES Number of Flutes 10.2.22
THREAD_WHIRL_FEED_PER_FLUTE Feed Per Flute 10.2.22
THREAD_WHIRL_FEED Feed 10.2.22
THREAD_WHIRL_PITCH Pitch (mm) 10.2.22
THREAD_WHIRL_RPM Spindle Speed 10.2.22
THREAD_WHIRL_CP2 Entry Clear Z 10.2.22
THREAD_WHIRL_CP3 Exit Clear Z 10.2.22
THREAD_WHIRL_IN_X Run In X 10.2.22
THREAD_WHIRL_IN_Z Run In Z 10.2.22
THREAD_WHIRL_OUT_X Run Out X 10.2.22
THREAD_WHIRL_OUT_Z Run Out Z 10.2.22
THREAD_WHIRL_START_X Start X 10.2.22
THREAD_WHIRL_START_Z Start Z 10.2.22
THREAD_WHIRL_END_X End X 10.2.22
THREAD_WHIRL_END_Z End Z 10.2.22
THREAD_WHIRL_APP_X Approach X 10.2.22
THREAD_WHIRL_APP_Z Approach Z 10.2.22
THREAD_WHIRL_RET_X Retract X 10.2.22
THREAD_WHIRL_RET_Z Retract Z 10.2.22
THREAD_WHIRL_COOLANT Coolant Type 10.2.22
THREAD_WHIRL_CONST_FEED_ON 1=Constant Feed On 10.2.22
THREAD_WHIRL_CONST_FEED_VAL Constant Feed value 10.2.22
THREAD_WHIRL_C_OFFSET Type of C Offset 10.2.22
THREAD_WHIRL_START_C_OFFSET C Offset Start 10.2.22
THREAD_WHIRL_END_C_OFFSET C Offset End 10.2.22
THREAD_MILL_PLUNGE_DIA Plunge diameter 10.3.11
THREAD_MILL_ENTRY_FEED Entry feedrate 10.3.11
THREAD_MILL_CRC_LINE CRC line length 10.3.11
THREAD_MILL_ENTRY_ANGLE Entry angle 10.3.11
THREAD_MILL_EXIT_ANGLE Exit angle 10.3.11
THREAD_MILL_ENTRY_EXIT_RAD Entry/Exit radius 10.3.11
THREAD_MILL_THREAD_HEIGHT Thread height 10.3.11
THREAD_MILL_CUT_DEPTH Depth of first cut 10.3.11
THREAD_MILL_LAST_CUT_AMOUNT Last cut amount 10.3.11
THREAD_MILL_TAPER_ANGLE Taper angle 10.3.11
THREAD_MILL_ADJUST_DEPTH_DELTA Amount to adjust end depth 10.3.11
THREAD_MILL_START_DEPTH Start depth Z 10.3.11
THREAD_MILL_END_DEPTH End depth Z 10.3.11