SET PROFILER MARKERS

From Macros Wiki
Revision as of 15:14, 27 September 2012 by Mikeo (talk | contribs) (Created page with "{{Command|syntax=SET_PROFILER_MARKERS <shape number> <side> <start feature> <start dist> <end feature> <end dist> <dir> <single feature> |description=:Set the prfoiler shape ...")
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Command

SET_PROFILER_MARKERS <shape number> <side> <start feature> <start dist> <end feature> <end dist> <dir> <single feature>


Set the prfoiler shape markers to be used by a contouring process.

Parameters

Shape number.
<side>
Tool side (0 = center, 1 = left, 2 = right).
<start feature>
Start feature (1 = first feature in the shape, 2 = second)
<start dist>
Distance along the start feature (0.0 = start, 1.0 = end).
<end feature>
End feature (1 = first feature in the shape, 2 = second)
<end dist>
Distance along the end feature (0.0 = start, 1.0 = end).
<dir>
Direction (0 = same direction as the shape, 1 = opposite direction).
<single feature>
Single Feature (1 = yes, 0 = no).

Example

SET_PROFILER_MARKERS 4, 1, 3, 0.2, 6, 0.8, 0, 0