SET SOLID CS
From Macros Wiki
- SET_SOLID_CS <solid number>, <cs number>, [<change cs>]
- Set the CS to be associated with a solid.
- <solid number>
- Solid number.
- <cs number>
- CS number.
- [<change cs>]
- 0 = move the solid using the CS, do not change the solid CS (default)
- 1 = same as the Mofify->Change CS (HVD) command.
- 2 = same as the Mofify->Change CS (YXZ) command.
- SET_SOLID_CS 6, 2
- SET_SOLID_CS 6, 3, 1